Meet the Shift 2.0 Control Bar with Back Line Trim
Trimming your control bar NOW EASIER THAN EVER. With the ability to fine tune your kite’s trim using an easily reached and adjusted control knob.
Twist in small quarter turn increments to add power, bump or nudge to depower. This easy to use system is ideal for any rider and ensures you have ‘hands on’ control when depowering the kite.
This is Backline trim’s new standard. Refining from the original Stick Shift, the new Shift 2.0 bar combines Innovate 3’s’ technologies and Ocean Rodeo engineering to be a back line trim bar that provides reliable seamless power adjustment. Enjoy riding without having to take your hands off the bar. Featuring a new stainless steel centre housing, better routing to flush out debris, and the latest in CL releases with the new Gen 8 Punch out system the Shift bar is your key to fun, progression, and riding that allows you to focus on where you are over what got you there.
Bar Length: 52 cm
Line Length: 22 m
The system is based on an all new ergonomically designed U shaped bar. This unique, lightweight design ensures rapid flushing of all sand and debris while offering easy inspection and access to all moving parts for in-the-field repairs.
The adjustable sliding stopper ball needs no special tools or set screws to hold in place and can be adjusted while on the water or riding. The Stick Shift bar end trim adjustment means no front line swivels, no rings, no cleats, no flopping trim line that’s forever out of reach. It also means the front lines are clear for a safe and secure front line re-ride every time.
TOTAL TRIM CONTROL WITH ONE KNOB
Twist the Sidewinder to add power, bump or nudge to depower. Quarter turns deliver 1cm of trim, five full rotations sheets in 21cm of direct 1:1 trim adjustment! Instantly depower your kite with with a swift downstroke motion on the knob or bump for incremental depower. With only one moving part, the simple open design allows rapid flushing of debris, easy inspection of all parts and simple maintenance if required. With your trim control always within reach, trim adjustment become intuitive and can be made while riding without needing to take your focus off the water ahead.
Note: Sidewinder delivers 1:1 total trim adjustment of 21cm, or 42cm of traditional 2:1 cleated pulley line depower.
52 CM CARBON COMPOSITE BAR
The Groove Bar’s carbon composite build delivers unparalleled strength while setting the new standard in lightweight bars. Ergonomically shaped for comfort, the under bar U channel houses the trim line and is easily flushed of all debris, ensuring smooth and reliable trim adjustment every time. Plush molded EVA grip with integrated bar floats deliver float, superior grip, and tangle free back lines. Retracting bar end bungees keep your flying lines snug and secure during storage.
‘HOUR GLASS’ BAR OPENING
Made with marine grade stainless steel, the center hole is highly tapered to accept the rugged 12mm PU tubing. The refined shape delivers smooth sheeting at extreme angles.
HELIX FORCE TENSION LINE PAYOUT SYSTEM
Pat Pend. The Helix Force Tensioned rear lines ensure clean paying rear lines even with slack back line. This feature is crucial when rigging on the beach, allowing you to easily depower your kite before launch, even with no tension on the back lines. Helix Force Tensioning provides perfect spooling every time, regardless of line tension from the kite.
ON THE FLY STOPPER ADJUSTMENT
The easily adjusted, single handed, on-the-fly bar stopper! The Shift’s ultra clean front line set-up offers up to 1.2 meters (3’9”) in sheeting range. Realize the full sheeting range of your kite by pushing the stopper out to your maximum reach. New riders can slide the stopper completely out to maximum throw for near total depower on SLE kites by simply just letting go of the bar. All styles of rider will appreciate the flexible stopper positioning for specific moves.
PUNCH OUT SAFETY - GEN 8 PUNCH OUT TRIM LOOP
In 2001, Ocean Rodeo designed and patented the push away release trim loop. Seventeen years later, the push action is firmly entrenched as the primary method of release throughout the kite boarding industry.
Reliable in both slack line and full powered situations, the push away motion works in opposition to the static connection between rider and control bar, providing a smooth release in all situations.
Added benefits of the Trim Loop Include;
For added security, the stainless release pin is shrouded by the release cuff, guarding your hand from release pin motion during activation.
The push release cuff tension has been tuned for easy operation in an emergency, yet secure enough to hold firm against the inevitable bumps and bangs encountered while riding.
The entire Gen 8 trim loop assembly has been shortened by 2 cm, delivering more bottom end sheeting range for more comfort.
Push release cuff remains locked up and ready to reset after an eject making reset quite literally a “snap”
REFINED ROTO HUB
Below bar line swivel “Roto Hub” has been further refined, offering up even smoother re-ride action and line twist management.
RELAUNCH BEAD - KITE RELAUNCH ASSIST
Relaunch beads are located on the back line leaders just above the ends of the Helix Force Tension system. They offer an easy spot to grip if a back line pull is required to expedite water relaunch.
LIGHTWEIGHT LINE SPLITTER
dynamically synced to the Roto Hub allowing no way for line twists within the line tubing. This ensures easy front line flag outs and makes line twists easy to sort out on the water.
PREMIUM LIROS FLYING LINES
German made Liros DC 401 Ultra HD flying lines, tested to 580 kg (1275 lbs). Lower sections of front lines are Liros D-Pro. Lines are coloured for easy rigging. Front line re-ride is orange for easy identification while resetting the system.
COMPATIBLE WITH ALL 4 LINE KITES
The Shift ships with an assortment of premium pigtails, ensuring compatibility with all major kite brands. Each pigtail is individually marked with length, allowing you to also adjust for eventual front line stretch.
20” HD KITE LEASH
Heavy duty 2.5cm (1”) wide webbing with flat elastic core. Corrosion resistant stainless clip with neoprene cover. Punch out (push away) release cuff with pin and loop reset.
Coil zip for easy access. Mesh panels for quick drying. Inside pocket for pigtail storage.
– R3 Component’s bar end trim adjustment. Twist to add power, bump to depower
– Hands on depower! Easily dump power while keeping both hands firmly on the bar and in control
– Easily used by riders of all size
– Open, easily inspected and ergonomically designed U shaped bar offers maximum sand and debris flush for smooth shifting every time and easy access to all moving parts for in-the-field repair and maintenance
– Quarter turn increments take 0.5cm of traditional trim line depower from the kite
– No swivels, trim straps or rings infringe the front line depower
– Near limitless sheeting options with our easily adjusted on-the-fly sliding stopper ball. Sliding stopper requires no special tools or set screws to adjust!
– Easily sheet in and out – even when kite looping or at extreme bar angles
– Integrated line tensioner ensures simple trim adjustment on the beach, prior to launch
– Front line re-ride and included pigtail ensure compatibility with all kite brands!
– Ultra lightweight bar feels incredible in your hand